CHAPTER 13
Cabling
IN THIS CHAPTER
Cabling the CTP150 Platform Overview | 69
Required Tools, Wires, and Cables for the CTP150 Platform | 70
Cabling a CTP150 Interface Module | 71
CTP150 Fast Ethernet Cables | 71
Cabling the CTP150 Platform Overview
Cabling the CTP platform requires the following main tasks:
1. Familiarize yourself with the module ports, and ensure that you have the cables and wires needed to
complete each cabling procedure.
2. Read and understand all safety warnings. (See “CTP Safety Guidelines and Warnings” on page 39.)
3. Connect timing ports.
4. Connect grounding wires to the chassis.
5. Connect the power cables from the power source to the power supply.
6. Connect the interface modules to their appropriate network interface.
For more information about CTP150 Series cable and pinout specifications, refer Cable and Pinout
Specifications.
RELATED DOCUMENTATION
CTP Cabling Recommendations | 25
69
To Next Page
Loading...
Need help?
General
