Juniper SSG 520M User Manual

SSG 500 M Series Hardware Installation and Configuration Guide
6  Document Conventions
Document Conventions
This document uses several types of conventions, which are introduced in the
following sections:
 “Command Line Interface Conventions” on this page
 “Naming Conventions and Character Types” on page 7
 “Web User Interface Conventions” on page 8
Command Line Interface Conventions
The following conventions are used to present the syntax of CLI commands in
examples and text.
In examples:
 Anything inside square brackets [ ] is optional.
 Anything inside braces { } is required.
 If there is more than one choice, each choice is separated by a pipe ( | ). For
example:
set interface { ethernet1 | ethernet2 | ethernet3 } manage
means “set the management options for the ethernet1, the ethernet2, or the
ethernet3 interface.”
 Variables are in italic type:
set admin user name1 password xyz
In text:
 Commands are in boldface type.
 Variables are in italic type.
NOTE: When entering a keyword, you only have to type enough letters to identify the
word uniquely. For example, typing set adm u kath j12fmt54 is enough to enter
the command set admin user kathleen j12fmt54. Although you can use this
shortcut when entering commands, all the commands documented here are
presented in their entirety.

Juniper SSG 520M Specifications

General

Model	SSG 520M
Number of Virtual Routers	10
Application Signatures	Yes
URL Filtering	Yes
Platform	Security Services Gateway
Interfaces	10/100/1000 Ethernet
Fixed I/O	8 x 10/100/1000
Expansion Slots	2
Weight	15.4 lb (7 kg)
Power Supply	100-240 VAC

Summary

Chapter 1 Hardware Overview

Port and Power Connectors

Front Panel

Details the components and LEDs visible on the front of the device.

Back Panel

Describes components located on the rear of the device, including power supplies.

Chapter 2 Installing and Connecting a Device

Before You Begin

Installing Equipment

Provides instructions for rack-mounting the SSG 500M Series device.

Connecting Interface Cables to a Device

Chassis Grounding

Explains the importance and procedure for grounding the device for safety.

Connecting the Power

Provides instructions for connecting AC and DC power to the device.

Powering a Device On and Off

Connecting a Device to a Network

Chapter 3 Configuring a Device

Default Device Settings

Accessing a Device

Explains methods to access, configure, and manage the device (Console, WebUI, Telnet).

Basic Device Configuration

Covers essential configurations like admin settings, interfaces, hostname, DNS, and routing.

WAN PIM Configuration

Basic Firewall Protections

Details default policies and security features like port-scan protection.

Resetting a Device to Factory Defaults

Procedures to reset the device to its original factory configuration.

Chapter 4 Servicing a Device

Required Tools and Parts

Physical Interface Modules

Describes the six slots for Ethernet or WAN PIMs, which are field installable.

Device Power Components (SSG 550M Only)

Upgrading Memory