Juniper SSR130 Hardware Guide

Figure 6: Clearance Requirements for Hardware Maintenance of SSR130
Requirements for Mounting an SSR130 Appliance on a Desktop or Other
Level Surface
You can install the SSR130 appliance on a desktop or other such level surface. When choosing a location,
allow at least 6 in. (15.2 cm) of clearance between the front and back of the chassis and adjacent equipment
or walls. Ensure that the desktop or other level surface on which the appliance is installed is stable and
securely supported.
Rack Requirements for SSR130
You can mount the SSR130 on two-post racks. You must order the rack mounting kit (part number:
SSR100-RMK) separately. Table 11 on page 25 provides the rack requirements and specifications for
SSR130.
24

Juniper SSR130 Specifications

General

Brand	Juniper
Model	SSR130
Category	Network Hardware
Language	English