lupas, lentes de aumento ou microscópios) a uma distância de 100 mm pode causar
riscos à visão.
¡Atención! El extremo de un cable o conector de fibra sin terminación puede emitir
radiación láser invisible. No se acerque al radio de acción ni lo mire directamente con
instrumentos ópticos. La exposición del ojo a una salida de láser con determinados
instrumentos ópticos (por ejemplo, lupas y microscopios) a una distancia de 100 mm
puede comportar lesiones oculares.
Varning! Osynlig laserstrålning kan komma från änden på en oavslutad fiberkabel eller
-anslutning. Titta inte rakt in i strålen eller direkt på den med optiska instrument. Att
titta på laserstrålen med vissa optiska instrument (t.ex. lupper, förstoringsglas och
mikroskop) från ett avstånd på 100 mm kan skada ögonen.
Chassis and Component Lifting Guidelines
•
Before moving the device to a site, ensure that the site meets the power, environmental, and clearance
requirements.
•
Before lifting or moving the device, disconnect all external cables and wires. In case of modular chassis,
consider removing the FRUs before lifting or moving the device.
•
As when lifting any heavy object, ensure that most of the weight is borne by your legs rather than your
back. Keep your knees bent and your back relatively straight. Do not twist your body as you lift. Balance
the load evenly and be sure that your footing is firm.
•
Use the following lifting guidelines to lift devices and components:
•
Up to 39.7 lb (18 kg): One person.
•
39.7 lb (18 kg) to 70.5 lb (32 kg): Two or more people.
•
70.5 lb (32 kg) to 121.2 lb (55 kg): Three or more people.
•
Above 121.2 lb (55 kg): Material handling systems (such as levers, slings, lifts and so on) must be used.
When this is not practical, specially trained persons or systems must be used (riggers or movers).
75
To Next Page
Loading...
Need help?
General
