Jura IMPRESSA C60 User Manual

15
1 Preparing and using for the first time
Your IMPRESSA creates fine, creamy, feather-light milk foam with a
perfect consistency. The most important requirement for frothing
milk is a milk temperature of 39–46°F (4–8°C). We would therefore
recommend using a milk cooler or a vacuum milk container.
T Remove the protective cover from the fine foam frother.
T Connect the milk pipe to the fine foam frother. To do this,
attach the end of the milk pipe to the connector on the right-
hand side of the fine foam frother. Use the short pipe for a
milk container and the long pipe for a milk carton.
T Connect the other end of the milk pipe to a milk container
or immerse it in a milk carton (Figure: optional JURA
stainless steel vacuum milk container).
Connecting milk

Jura IMPRESSA C60 Specifications

General

Product type	Espresso machine
Certification	TUV
Capacity in cups	- cups
Number of spouts	2
Coffee input type	Coffee beans, Ground coffee
Coffee maker type	Fully-auto
Appliance placement	Countertop
Water tank capacity	1.9 L
Coffee beans capacity	200 g
Adjustable coffee strength	Yes
Maximum operating pressure	15 bar
Reservoir for brewed coffee	-
Ground coffee container capacity	16 cups
Cord length	1.1 m
Control type	Rotary
Product color	Black
AC input voltage	230 V
AC input frequency	50 Hz

Weight and Dimensions

Depth	410 mm
Width	280 mm
Height	345 mm
Weight	9600 g