29
4 Permanent settings in programming mode
In the program item LANGUAGE you can select the language used
by your IMPRESSA.
Example: Proceed as follows to change the language from
EN
to
DE.
Precondition:
ESPRESSO is displayed (example).
O T Touch the P symbol for approximately 2 seconds until
RINSE appears on the display.
g T Turn the Rotary Switch until
LANGUAGE is displayed.
k T Press the Rotary Switch to enter the program item.
EN
g T Turn the Rotary Switch until DE is displayed.
k T Press the Rotary Switch to confirm the setting.
OK appears briefly on the display.
SPRACHE
O T Touch the P symbol to exit programming mode.
ESPRESSO (example)
Language