Jura IMPRESSA C60 User Manual

27
4 Permanent settings in programming mode
The energy-saving mode (Energy Save Mode, E.S.M.
©
) helps you to
prevent your machine from consuming power unnecessarily and to
actively save energy:
U
ENERGYw
U
Soon after the last preparation, the IMPRESSA stops heating
up. After about 5 minutes the message
ENERGY w is
displayed.
U
Before you can prepare a specialty coffee, steam or hot
water, the machine must heat up.
U
ENERGY-
U
All specialty coffees as well as hot water can be prepared
without having to wait.
U
Before you can prepare steam, the machine must heat up.
Example: Proceed as follows to change the energy-saving mode
from
ENERGYw to ENERGY-.
Precondition:
ESPRESSO is displayed (example).
 O T Touch the P symbol for approximately 2 seconds until
RINSE appears on the display.
 g T Turn the Rotary Switch until
ENERGYw is displayed.
 k T Press the Rotary Switch to enter the program item.
SAVEw
 g T Turn the Rotary Switch until SAVE- is displayed.
 k T Press the Rotary Switch to confirm the setting.
OK appears briefly on the display.
ENERGY-
 O T Touch the P symbol to exit programming mode.
ESPRESSO (example)
Energy-saving mode

Jura IMPRESSA C60 Specifications

General

Product type	Espresso machine
Certification	TUV
Capacity in cups	- cups
Number of spouts	2
Coffee input type	Coffee beans, Ground coffee
Coffee maker type	Fully-auto
Appliance placement	Countertop
Water tank capacity	1.9 L
Coffee beans capacity	200 g
Adjustable coffee strength	Yes
Maximum operating pressure	15 bar
Reservoir for brewed coffee	-
Ground coffee container capacity	16 cups
Cord length	1.1 m
Control type	Rotary
Product color	Black
AC input voltage	230 V
AC input frequency	50 Hz

Weight and Dimensions

Depth	410 mm
Width	280 mm
Height	345 mm
Weight	9600 g