EasyManuals Logo

Jura IMPRESSA C60 User Manual

Jura IMPRESSA C60
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #33 background imageLoading...
Page #33 background image
33
5 Maintenance
j TAs soon as the receptacle containing the cleaning solution is
empty, turn the switch to theo position.
STEAM/ READY
TRinse the receptacle thoroughly, fill it with 8.5 oz (250 ml) of
fresh water and immerse the milk pipe in the water.
TEmpty the other receptacle and place it under the fine foam
frother once more.
h TTurn the switch to them position.
STEAM, the fine foam frother and the milk pipe are rinsed
with fresh water.
j TAs soon as the receptacle containing the fresh water is
empty, turn the switch to theo position.
STEAM/ READY
The cleaning of the fine foam frother is now complete.
To make sure the fine foam frother works properly, and in the
interests of hygiene, it must be dismantled and rinsed daily if you
have been preparing milk. Your IMPRESSA will not prompt you to
dismantle and rinse the frother.
TRemove the milk pipe and rinse it thoroughly under running
water.
TCarefully remove the fine foam frother from the Connector
System
©
by twisting slightly.
TDismantle the fine foam frother into its individual parts.
TRinse all the parts of the fine foam frother thoroughly under
running water. If there are severely dried-on milk residues,
firstly immerse the individual parts in a solution of 8.5 oz
(250 ml) cold water and one capful of JURA milk system
cleaner. Then rinse the parts thoroughly.
TRe-assemble the fine foam frother.
E Ensure that all individual parts are correctly and firmly
connected to ensure optimum operation.
TFirmly attach the fine foam frother to the Connector
System
©
.
Dismantling and rinsing
the fine foam frother

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Jura IMPRESSA C60 and is the answer not in the manual?

Jura IMPRESSA C60 Specifications

General IconGeneral
Product typeEspresso machine
CertificationTUV
Capacity in cups- cups
Number of spouts2
Coffee input typeCoffee beans, Ground coffee
Coffee maker typeFully-auto
Appliance placementCountertop
Water tank capacity1.9 L
Coffee beans capacity200 g
Adjustable coffee strengthYes
Maximum operating pressure15 bar
Reservoir for brewed coffee-
Ground coffee container capacity16 cups
Cord length1.1 m
Control typeRotary
Product colorBlack
AC input voltage230 V
AC input frequency50 Hz
Weight and Dimensions IconWeight and Dimensions
Depth410 mm
Width280 mm
Height345 mm
Weight9600 g

Related product manuals