34
5 Maintenance
To make sure the professional fine foam frother works properly, and
in the interests of hygiene, it must be dismantled and rinsed daily if
you have been preparing milk. Your IMPRESSA will not prompt you
to dismantle and rinse the frother.
T Remove the milk pipe and rinse it thoroughly under running
water.
T Carefully remove the professional fine foam frother from the
Connector System
©
by twisting slightly.
T Dismantle the professional fine foam frother into its
individual parts.
T Rinse all the parts of the professional fine foam frother
thoroughly under running water. If there are severely dried-
on milk residues, firstly immerse the individual parts in a
solution of 8.5 oz (250 ml) cold water and one capful of JURA
milk system cleaner. Then rinse the parts thoroughly.
T Re-assemble the professional fine foam frother.
E Ensure that all individual parts are correctly and firmly
connected to ensure optimum operation.
T Firmly attach the professional fine foam frother to the
Connector System
©
.
Your IMPRESSA no longer has to be descaled if you are using the
CLEARYL Blue filter cartridge. If you did not activate the filter
cartridge the first time you used the machine, you can do this now
as follows.
E Perform the ‘inserting the filter’ operation without any
interruptions. This will ensure that your IMPRESSA always pro-
duces its best.
Precondition:
ESPRESSO is displayed (example).
O T Touch the P symbol for approximately 2 seconds until
RINSE appears on the display.
g T Turn the Rotary Switch until
FILTER- is displayed.
k T Press the Rotary Switch to enter the program item.
NO
g T Turn the Rotary Switch until YES is displayed.
Dismantling and rinsing
the professional fine
foam frother
Inserting and activating
the filter
To Next Page
Loading...
Need help?
General
Weight and Dimensions
