26
4 Permanent settings in programming mode
k T Press the Rotary Switch to confirm the setting.
OK appears briefly on the display.
STRENGTH
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit the program item.
ESPRESSO
O T Touch the P symbol to exit programming mode.
ESPRESSO (example)
The harder the water is, the more frequently the IMPRESSA needs
to be descaled. It is therefore important to set the water hardness
accurately.
The water hardness can be adjusted on a continuous scale between
1 °dH and 30 °dH.
E If you are using the CLEARYL Blue filter cartridge and have
activated it, it is not possible to set the water hardness.
Example:Proceed as follows to change the water hardness setting
from
16°dH to 25°dH.
Precondition:
ESPRESSO is displayed (example).
O T Touch the P symbol for approximately 2 seconds until
RINSE appears on the display.
g T Turn the Rotary Switch until
HARDNESS is displayed.
k T Press the Rotary Switch to enter the program item.
16°dH
g T Turn the Rotary Switch until 25°dH is displayed.
k T Press the Rotary Switch to confirm the setting.
OK appears briefly on the display.
HARDNESS
O T Touch the P symbol to exit programming mode.
ESPRESSO (example)
Setting the water
hardness
To Next Page
Loading...
Need help?
General
Weight and Dimensions
