0
While the video mode is shown in the image, the same operations
apply for the still image mode.
7
Tap “EXECUTE”.
.
0
The number of discs required to copy the files is displayed.
Prepare the discs accordingly.
8
Tap “AUTO” or “BY DATE”. (A mode only)
.
0
When “AUTO” is selected, videos with similar recording dates are
displayed in groups.
0
When “BY DATE” is selected, videos are displayed according to
recording dates.
9
Tap “EXECUTE”.
.
0
When “INSERT THE NEXT DISC TO CREATE OR PRESS STOP TO
EXIT” appears, change the disc.
10
Tap “OK” when “COMPLETED” is displayed.
.
11
Press and hold the M button for 2 seconds or more to turn off this unit
and disconnect the USB cable.
Caution :
0
Do not turn off the power or remove the USB cable until copying is
complete.
0
Files that are not on the index screen during playback cannot be copied.
Special files cannot be copied either.
0
All DVDs will be finalized automatically.
Files cannot be added to the DVD-R/DVD-RW later.
Memo :
0
To check the created disc, refer to ““Playing Back with a DVD Writer”
(A p. 145) ”.
“Playing Back with a DVD Writer” (A p. 145)
Playing Back with a DVD Writer
You can play back the DVDs created on this unit.
1
Prepare a DVD writer.
0
Insert the DVD to play back into the DVD writer.
“Preparing a DVD Writer (CU-VD3)” (A p. 139)
“Preparing a DVD Writer (CU-VD50)” (A p. 139)
2
Tap “PLAYBACK” in the BACK-UP menu.
.
0
An index screen (thumbnail display) of the videos in the disc appears.
3
Tap on the file to start playback.
.
0
Tap “J” to return to the “BACK-UP” menu.
0
For details on video playback, refer to ““Operation Buttons for Video
Playback” (A p. 117) ”.
“Operation Buttons for Video Playback” (A p. 117)
0
To exit, stop playback and turn off the camcorder by pressing the M
button for about 2 seconds. Then, disconnect the USB cable.
Memo :
0
When playing back DVD-Video discs, date/time and other information will
not be displayed on the screen.
Copying
145
To Next Page
Loading...
Need help?
General