JVC Everio GZ-VX755 User Manual

6
Tap “ADD”.
(Operation on this camera)
.
7
Enter the recipient’s e-mail address.
.
0
Tap on the on-screen keyboard to enter characters. The character
changes with every tap.
0
Tap “DELETE” to delete a character.
0
Tap “CANCEL” to exit.
0
Tap “A/a/1” to select character input type from upper case letter, lower
case letter, and number.
0
Tap E or F to move one space to the left or right.
0
After setting, tap “SET”.
Memo :
0
Up to 8 e-mail addresses can be registered as recipients.
Caution :
0
When setting another person as the recipient, be sure to obtain his/her
consent in advance.
0
Check whether notifications indicating errors have been sent to the
sender’s e-mail address. (Make use of a computer or similar devices as it
is not possible to check from the camera.)
If no notifications are received: Refer to “Unable to send e-mails.” and adjust
the settings accordingly.
If notifications are received: Check the content of the notification.
*Note
Do not continue sending e-mails with the same settings if you receive error
notifications. Depending on the provider, you may be marked as a sender
of spam (junk mail).
Setting the Detection Method of this Camera (DETECT/MAIL
SETTING)
Sets the detection method to start recording.
1
Tap “MENU”.
(Operation on this camera)
.
0
The shortcut menu appears.
2
Tap “Wi-Fi” (
Q
) in the shortcut menu.
(Operation on this camera)
.
3
Tap “DETECT/MAIL SETTING”.
(Operation on this camera)
.
4
Tap “DETECTION METHOD”.
(Operation on this camera)
.
0
Tap “MOTION DETECTION” or “FACE DETECTION”.
0
Select “MOTION DETECTION” to start recording upon detection of
subject’s movements.
0
Select “FACE DETECTION” to start recording upon detection of
human faces.
Using Wi-Fi
34

JVC Everio GZ-VX755 Specifications

General

Brand	JVC
Model	Everio GZ-VX755
Category	Camcorder
Language	English