Reducing Camera Shake
When the image stabilizer is set, camera shake during recording can be
effectively reduced.
1
Tap “MENU”.
.
0
The top menu appears.
2
Tap “RECORD SETTING”.
.
3
Tap “IS”.
.
0
Tap 0 or 1 to move to the previous/next menu.
0
Tap L to exit the menu.
0
Tap J to return to the previous screen.
4
Tap the desired setting.
Setting Details
b OFF
Deactivates image stabilizer.
a
ON
Reduces camera shake under normal
shooting conditions.
r
ON (AIS)
(A video mode only)
Reduces camera shake more effectively
when shooting bright scenes on the wide
angle end.
Only on the wide angle end (approx. 5x).
s
(Enhanced AIS)
(A video mode only)
The area of correction in the enhanced AIS
mode is greater than that in the AIS mode.
Camera shake can be reduced more
effectively even
when recording is performed
by zooming from wide angle to telephoto, or
moving together with the subject.
0
For still image mode, only “OFF” and “ON” are available.
0
When “VIDEO
QUALITY” is set to “SSW” or “SEW”, Enhanced AIS mode
cannot be used.
Memo :
0
It is recommended to set the image stabilizer to “OFF” when shooting a
subject of little movement with the unit on a tripod.
0
Complete stabilization
may not be possible if camera shake is excessive.
0
When “ON (AIS)” is set, the angle of view becomes narrower. In the
enhanced AIS mode, the angle of view becomes even narrower than “ON
(AIS)”.
0
Image stabilization only starts when the SNAPSHOT button is pressed
halfway during still image recording.
Recording
37
To Next Page
Loading...
Need help?
General
