PLAYBACK OTHER FILE
The management information of a video may be damaged if recording is not
performed correctly,
such as turning off the power in the middle of recording.
You can perform the following operations to play back the videos with
defective management information.
1
Check that the unit is in the video mode.
.
0
Check if video mode A is activated.
0
If still image mode (B) is activated, switch to video mode (A).
“Selecting Video/Still Image Recording Mode” (A p. 19)
2
Tap <<MEDIA to select the playback mode.
.
3
Tap “MENU”.
.
4
Tap “PLAYBACK SETTING”.
.
5
Tap “PLAYBACK OTHER FILE”.
.
PLAYBACK OTHER FILE
PLAYBACK SETTING
6
Tap on the file to start playback.
.
“Playing Back Videos” (A p. 45)
Memo :
0
An MTS file is created in the EXTMOV folder when management
information is corrupted.
0
Depending on the condition of the damaged file, playback might fail or
may not run smoothly.
Playback
51
To Next Page
Loading...
Need help?
General
