6
After making sure that everyone is facing the camera, press the
SNAPSHOT button.
.
.
0
Frames appear around the faces of the subjects.
0
Pressing the SNAPSHOT button again starts the 10-second self-
timer.
7
The photographer enters the frame.
.
0
The shutter is released three seconds after the photographer enters
the frame.
0
To stop the self-timer, press the SNAPSHOT button again.
Memo :
0
The “FACE DETECTION” function may fail to detect faces depending on
the shooting environment.
Checking the Remaining Recording Time
You can check the remaining recording time on the SD card as well as the
remaining battery power.
1
Tap “MENU”.
.
0
The top menu appears.
2
Tap “INFO.”.
.
0
If in the still image mode, go directly to step 4.
3
Display the remaining recording time.
.
USED
FREE
MAX RECORDING TIME
0
The remaining
recording time is displayed only in the video recording
mode.
0
To display the remaining battery power, tap l.
0
l will not be displayed when the AC adapter is connected.
0
To exit the display, tap L.
4
Display the remaining battery power.
.
MIN
MIN
MAX TIME
REMAINING BATTERY
MIN
0
“MAX TIME” is an approximate value.
0
When two
battery packs are attached, “MAX TIME” displays the total
time of both battery packs.
0
For video recording, tap J to return to the remaining recording time
display.
0
Tap L to exit the display.
0
Remaining battery power will not be displayed when the AC adapter
is connected.
Memo :
0
You can change to the desired video quality by tapping on it from the
remaining recording time display.
Recording
43
To Next Page
Loading...
Need help?
General
