d . E N G I E N R E M O VA L A N D I N S TA L L AT I O N
REMOVAL INSTALLATION
Guiding-wind cover/fan cover/carburetor left crankcase assy./gearbox assy.
Left crankcase cover/gasket/piston pin gearbox
Outside part of left crankcase crankshaft/left and right crank motor
Chain adjustor /cylinder head cover oil pump/super-clutch/electric start transition gear
Camshaft holder/cam right crankcase cover/oil filter/oil gauge
Cylinder cover/gasket/pin coil/flywheel/fan impeller
Cylinder/gasket/pin piston/piston pin/spring clip
Spring clip/piston pin/piston cylinder/gasket/pin
fan impeller/flywheel/coil cylinder cover/gasket/pin
Right crankcase cover/oil filter/oil gauge cam/camshaft supporter
Right crankcase outside chain adjustor/cylinder head cover
Start motor/left and right crankcase/crank left crankcase outside assy.
Gearbox left crankcase cover/gasket/pin
Left crankcase/gearbox cover guiding-wind cover/fan cover/carburetor
NOTICE:
a) Before installation, wash engine parts, and then lubricate engine, refer to recommended torque volume to lock
screw.
b) Pay special attention to single direction fixing accessories.
Start and inspect oil road lubricating system after having reinstalled engine.
To Next Page
Loading...
Need help?
General
