To Next Page

To Previous Page

Individual Pattern Adjustment

Example:patterns 28, 30 and 32

Stitch pattern: 28, 30, 32

Needle thread tension 3 to 4

Presser foot F: Satin stitch foot

Pressure dial 3

You can adjust the stitch width, stitch length and elongation

ratio of each pattern in a combination individually.

Change the elongation ratio of pattern 28 in the

combination of patterns 28, 30 and 32.

Press the key so the cursor will go to the pattern

you are going to change.

Press the _djo,tkey.

Change the eiongation ratio by pressing the + or the

-- key.

Press or, key to register the adjustment and the screen

will go back to the original window.

Start to sew.

ii ii ! i.-i!iii

Editing Programmed Patterns

• Example:

To delete pattern 30 from the combination of

patterns 28, 30 and 32.

Press the key to move the cursor under pattern 30

you would like to delete.

Press _ key.

Pattern 30 is deleted.

• Example:

To insert pattern 38 between pattern 28 and 30 in the

combination of patterns 28, 30 and 32,

Press the _ key to move the cursor under the pattern

30 you would like to insert.

Select pattern 38.

The pattern 38 will be inserted between pattern 28

and 30.

Note:

• The selected patterns on the panel and actual sewing

result will possibly have slight difference.

iii i÷ iiiii!i i

Kenmore 10 User Manual

Questions and Answers: