Kenmore 106.89599100 User Manual

4-4
n
COMPONENT ACCESS
REMOVING RESERVOIR COVER
NOTE: The reservoir cover on a 15” swing door ice maker
simply unsnaps to remove. The cover on a 18” ice maker
has 2 screws securing it to the control housing.
4. Remove the 2 screws located on the bottom of the
cover. See Figure 8.
HEATER GRID REMOVAL
6. Remove the left and right side hex head screws and
disconnect the left and right side wire harnesses.
Slide out the heater assembly.
NOTE: A visual check and a resistance can be made of
the heater wire. The heater grid operates on 9.4 VAC.
Resistance is 5 OHMS. See Figure 10.
Ice Bin Components (cont.)
FIGURE 8
ϮϬϭϯdZ/Ed,dZ/EZ
 ϲ
hEZ^dE,KtdK^^KDWKEEd^
ϭϴZKWKtEKKZ
&ŝŐƵƌĞϭ
Đ
5. Lift up the ice scoop storage compartment as you pull
out on the bottom of the cover. See Figure 9.
FIGURE 9
ϮϬϭϯdZ/Ed,dZ/EZ
 ϲ
hEZ^dE,KtdK^^KDWKEEd^
ϭϴZKWKtEKKZ
&ŝŐƵƌĞϭ
Đ
FIGURE 10
REMOVING THE BIN THERMISTOR
7. Remove 1 screw and the thermistor. See Figure 11.
FIGURE 11
t,/Z>WKK>KZWKZd/KE KE&/Ed/>  ϭϭ
ZDKs/E'd,/Ed,ZD/^dKZ
Zz^d>ϱϬη/D,/EͲϮϬϭϯdϯ
t,/Z>WKK>KZWKZd/KE KE&/Ed/>  ϭϭ
ZDKs/E'd,/Ed,ZD/^dKZ
Zz^d>ϱϬη/D,/EͲϮϬϭϯdϯ

Kenmore 106.89599100 Specifications

General

Brand	Kenmore
Model	106.89599100
Category	Ice Maker
Language	English