Kenwood DMX6018BT User Manual

54 ENGLISH
SettingsSettings
<Guidelines Setup>
Adjust the parking guidelines according to the size of
the car, parking space and so on.
When adjusting the parking guidelines, make sure to
use the parking brake to prevent the car from moving.
Touch one of the marks (1), then adjust the
position of the selected mark (2).
Make sure that A and B are horizontally parallel, and
that C and D are the same length.
• Touch [Initialize] to set all the marks to the initial
default position. A confirmation message appears.
Touch [Yes].
<Front Camera>
(Only for DDX795/DDX775BH/DDX595/DDX575BT/
DDX718WBTL/DMX718WBTL)
• ON: Select this when a front view camera is
connected.
• OFF (Initial): Select this when no camera is
connected.
<Front Camera Mirror Image>
(Only for DDX795/DDX775BH/DDX595/DDX575BT/
DDX718WBTL/DMX718WBTL)
• ON: Displays the picture from the front view camera
horizontally reversed.
• OFF (Initial): Displays the picture from the front view
camera as it is.
Special system settings
Display the <Special> screen.
On the Home screen, touch as follows:
Then, on the <SETUP> screen, touch [Special].
<DEMO>
• ON (Initial): Activates the display demonstration.
• OFF: Deactivates the display demonstration.
<Manual Power OFF>
Assign the function of the HOME on the monitor panel
when pressed and held.
• AV OFF: Turns off the screen and audio.
The screen and audio restores when receiving call,
inputs video signal from the rear view camera, etc.
• Complete OFF (Initial): Turns off the power.
<SETUP Memory>
• Lock: Locks the <Audio SETUP Memory>/<Audio
SETUP Recall>/<Audio SETUP Clear> settings.
– The items in the <Speaker/X’over> settings
cannot be adjusted when [Lock] is selected.
• Unlock: Unlocks the settings.
<Audio SETUP Memory>*
Memorizes the following audio settings:
• Fader/Balance
• Speaker/X’over
• Equalizer (Adjustment on user preset ([User1] –
[User4])/Subwoofer level adjustment)
• Position/DTA
• Sound Effect
A confirmation message appears. Touch [Yes].
<Audio SETUP Recall>*
Recall the settings memorized by <Audio SETUP
Memory>. A confirmation message appears. Touch
[Yes].
<Audio SETUP Clear>*
Clear the settings made on the <Audio> screen. A
confirmation message appears. Touch [Yes].
<Software Information>
Display the information of the software (such as serial
number, application version, system version, etc.). You
can update the software.
* Available only when <SETUP Memory> is set to [Unlock].
ENDDX2018TCKR.indb54ENDDX2018TCKR.indb54 2017/11/3015:352017/11/3015:35

Kenwood DMX6018BT Specifications

General

Brand	Kenwood
Model	DMX6018BT
Category	Car Receiver
Language	English