5
Connecting to a Cigarette Lighter Socket
To use the cigarette lighter socket, use the optional KVC-22 DC vehicular charger
adapter. When using the Charger, attach it to the vehicle as shown below.
DC power cable (supplied with the KVC-22)
To the cigarette lighter socket
Charger + KVC-22
To the jack
Note: Refer to the KVC-22 instruction manual for how to connect the charger to a cigarette
lighter socket.
CAUTION: Do not fix the Charger near an airbag nor in places where it will be a hindrance
while driving.
CONNECTING TO THE PC
Use the optional PG-4Y PC interface cable to connect the transceiver to a PC.
Plug the Speaker/ Microphone connector to the SP/MIC jack and the DB-9
connector to one of the COM (serial) ports on your PC.
PG-4Y
To PC
To download the MCP-5A software, go to:
http://www.kenwood.com/i/products/info/amateur/software_download.html
(This URL may change without notice.)
Note: No guarantee is provided for data that may be erased or destroyed due to
malfunctions of this unit or your computer.
To Next Page
Loading...
Need help?
General
