15
MENU SETUP
WHAT IS A MENU?
Many functions on this transceiver are selected or configured via a software-
controlled Menu rather than through the physical controls of the transceiver.
Once you become familiar with the Menu system, you will appreciate its
versatility. You can customize the various timings, settings and programming
functions on this transceiver to meet your needs without using many controls and
switches.
MENU ACCESS
1 Press [MENU].
• A brief explanation of the Menu and the Menu No. appear on the display.
2 Rotate the ENC control to select your desired Menu No.
3 Press [F] < OK > to configure the parameter of the currently selected
Menu No.
4 Rotate the ENC control to select your desired parameter.
5 Press [F] < OK > to store the new setting.
6 Press [MENU] or [PTT] to exit Menu mode.
To Next Page
Loading...
Need help?
General
