To Next Page

To Previous Page

MEMORY CHANNELS

In Memory channels, you can store frequencies and related data that you often

use. Then you need not reprogram the data every time. You can quickly recall a

programmed channel by simple operation. A total of 200 Memory channels are

available.

SIMPLEX & REPEATER OR ODD-SPLIT MEMORY CHANNEL?

You can use each memory channel as a simplex & repeater channel or as an

odd-split channel. Store only one frequency to use as a simplex & repeater

channel or two separate frequencies to use as an odd-split channel. Select either

application for each channel depending on the operations you have in mind.

Simplex & Repeater channels allow:

• Simplex frequency operation

• Repeater operation with a standard offset (if an offset direction is stored)

Odd-split channels allow:

• Repeater operation with a non-standard offset

The data listed below can be stored in each Memory channel:

Parameter

Simplex &

Repeater

Odd-split

Receive/ Transmit frequency Yes No

Receive/ Transmit frequency step size Yes No

Receive only frequency No Yes

Receive only frequency step size No Yes

Transmit only frequency No Yes

Transmit only frequency step size No Yes

Offset frequency Yes No

Tone On/Off Yes Yes

Tone frequency Yes Yes

CTCSS On/Off Yes Yes

CTCSS frequency Yes Yes

DCS On/Off Yes Yes

DCS code Yes Yes

Cross tone On/Off Yes Yes

Shift (Offset direction) Yes No

Reverse On/Off Yes No

Kenwood TH-K40A User Manual

Other manuals for Kenwood TH-K40A