KERN PBJ 420-3M User Manual

15 PBS/PBJ-BA-e-1718
3.2 Overview of display
Display
Designation
Description
Indicates that the weighed value is stable. (*1) It marks the
currently selected element during menu element selection.
Tare symbol
Informs about setting an initial tare value.
Weight symbol
It is displayed during adjusting the measuring range. It indicates
adjusting settings during menu selection. Flashes prior to start of
automatic adjustment.
Note:
If automatic adjusting of measuring range is not activated, a user
must perform it when this symbol flashes.
• with built-in weight (PBJ models refer to chapter 8.31.1)
•
with external weight (PBS models refer to chapter 8.1.2).
[ ]
Brackets
The non-calibrated value is given in brackets in calibrated scales.
Number symbol
Indicates numeric value entry.
Menu symbol
Appears during menu selection. Always shown when the menu is
locked.
Asterisk
Indicates that the displayed numeric value is not a mass value.
Communication
symbol
Is lit up during communication with external appliances via RS-
232C cable. Shown when communication functions are ON.
▼
Inverse triangle
symbol
Indicates the setting of specific weight measurement. It is used
as an alternative to the decimal point.
→0←
Zero indicator
Animal symbol
Shows the setting of animal weighing function.
Automatic storage
and zeroing symbol
Shows the setting of automatic saving and zeroing function.
M
Memory Symbol
Balance is in formula mode
Auto Print symbol
Displays set-up of the Auto Print function.
Standby mark
Appears when the balance power supply is in stand-by mode. It
is also displayed when operational function changes into stand-by
mode.
*1 Stabilisation symbol
When the stabilisation symbol is illuminated for a long time, the displayed value may oscillate when a
weight is slowly changed or stabilisation detection range is set to high value.
Capacity display
Display of units
Stability display

KERN PBJ 420-3M Specifications

General

Brand	KERN
Model	PBJ 420-3M
Category	Scales
Language	English