KERN PBJ 420-3M User Manual

25 PBS/PBJ-BA-e-1718
7.6 Connection of peripheral devices
Before connecting or disconnecting of additional devices (printer, PC) to the data
interface, always disconnect the balance from the power supply.
With your balance, only use accessories and peripheral devices by KERN, as they
are ideally tuned to your balance.
Terminal for external devices:
Interfaces at the balance back
1
RS-232C interface
2
DATA IO interface
3
AUX interface
4
DC-IN connection
5
Keyboard interface
7.7 Initial Commissioning
In order to obtain exact results with the electronic balances, your balance must have
reached the operating temperature (see warming up time chap. During this warming
up time the balance must be connected to the power supply (mains, accumulator or
battery).
The accuracy of the balance depends on the local acceleration of gravity.
Strictly observe hints in chapter Adjustment.
5
4
3
2
1

KERN PBJ 420-3M Specifications

General

Brand	KERN
Model	PBJ 420-3M
Category	Scales
Language	English