PBS/PBJ-BA-e-1718 24
7.4 Mains connection
Power is supplied via the external mains adapter. The stated voltage value must be
the same as the local voltage.
Only use original KERN mains adapters. Using other makes requires consent by
KERN.
Models PBJ:
Prior to mains connection, loosen the transport guard screws at the scale
according to the sign in any case, see chapter 7.3
7.5 Switch power supply on
Supply power to balance via mains adapter. The display lights up and the
balance carries out a selftest.
Models PBS
After a successful selftest „OFF“ is displayed.
To switch on press the ON/OFF button. The balance will carry out a
display test. As soon as the weight display appears, the balance is ready
To Next Page
Loading...
Need help?
General
