14 of 42
Revision 2.06
KiloVault
®
LLC • 330 Codman Hill Road, Boxborough, MA 01719 • +1 (888) 218-5924 • info@kilovault.com • www.kilovault.com
Figure 3: Installation Flowchart
4.2. Unpacking the HAB™
Note:
• Prior to installing your HAB™, please take pictures of the label on the left
side, including the serial number, serial number barcode, QR code, and MAC
address. Store this information for your records, it is valuable and may be
necessary for system configuration or troubleshooting. Depending on your
HAB’s position, viewing this information after installation may be difficult.
The HAB™ weighs 207.23 lb. (94 kg); wear appropriate protective equipment, such as gloves
and protective footwear, when handling this unit. Only move the HAB™ with enough personnel
to safely lift and steady the HAB™. We strongly recommend using lift equipment and straps to
secure and steady the HAB™.
Keep the HAB™ in its box until you are ready to install it. Open the box and inspect all contents
to ensure all items in the box are undamaged. Remove the foam packing material to uncover
the HAB™.
The box contains two lift handles designed exclusively for lifting the HAB™ out of the box, not
for mounting on to the wall. When you are ready to remove the HAB™ from its box for
To Next Page
Loading...
Need help?
General