FAN SWITCH
You can adjust the air flow by using the fan switch.
The air flow can be adjusted to 6 levels.
• Press the △ switch to increase the air flow; press the ▽
switch to decrease the air flow.
• During auto operation, the air flow is automatically adjust-
ed.
Monitor display and air flow
Monitor display
Air flow rate
Air flow "low"
Air flow "medium 1"
Air flow "medium 2"
Air flow "medium 3"
Air flow "medium 4"
Air flow "high"
TEMPERATURE SET SWITCH
Use the temperature set switch to adjust the temperature inside
the cab. The temperature can be set between 18 °C {64.4 °F} 
and 32 °C {89.6 °F} .
• Press the △ switch to raise the set temperature; press the
â–½ switch to lower the set temperature.
The set temperature is indicated on the display monitor.
• The temperature is generally set at 25 °C {77 °F} .
• The temperature can be set in stages of 0.5 °C {0.9 °F} .
Monitor display and function
Monitor display (°C)
Set temperature
18.0 Max. cooling
18.5 to 31.5 Adjusts temperature inside cab to set temperature
32.0 Max. heating
HANDLE AIR CONDITIONER OPERATION
3-248
To Next Page
Loading...
Need help?
General
