INTRODUCTION
MAIN USE OF MACHINE
This Komatsu machine is designed to be used mainly for the following work:
• Dozing work
• Leveling work
• Cutting into hard or frozen ground or ditching
• Felling trees, removing stumps
For details of work procedure, see OPERATION, “RECOMMENDED APPLICATIONS (3-222)”.
DIRECTIONS OF MACHINE
In this Operation and Maintenance Manual, the directions of the machine (front, rear, right, left) are determined
according to the view from operator's seat (E) in the direction of travel (front) of the machine.
(A) Front
(B) Rear
(C) Left
(D) Right
(E) Operator's seat
(F) Sprocket
INTRODUCTION FOREWORD
1-4
To Next Page
Loading...
Need help?
General
