Komatsu D65EX-18 User Manual

VISIBILITY FROM OPERATOR'S SEAT
The visibility of this machine required by visibility standards (ISO 5006) are shown in the drawing below.
Proximity visibility
The figure below shows a visibility from the machine at a spot 1.0m (3 ft 3 in) away from outside the machine
and 1.5m (4 ft 11 in) above the ground. Shaded area (A) in the figure shows an area whose view is blocked by a
part of the machine when the machine is equipped with the mirrors and other visibility assistant devices. Be fully
aware that there is an area where the operator cannot see when operating the machine.
12m radius visibility
The figure below shows a visibility from the machine for a radius of 12m (39 ft 4 in). Shaded area (B) in the
figure shows an area whose view is blocked by a part of the machine when the machine is equipped with the
mirrors and other visibility assistant devices. Be fully aware that there is an area where the operator cannot see
when operating the machine.
FOREWORD INTRODUCTION
1-5

Komatsu D65EX-18 Specifications

General

Brand	Komatsu
Model	D65EX-18
Category	Construction Equipment
Language	English