METHOD FOR PARKING MACHINE
WARNING
• Avoid a sudden stop. Stop the machine gradually.
• Place the machine on a firm, level ground.
Do not park the machine on a slope.
If it is unavoidably necessary to park the machine on a
slope, place parking brake lever (4) in LOCK position
and insert blocks underneath the track shoes to pre-
vent the machine from moving. As an additional safety
measure, thrust the work equipment into the ground.
• If the work equipment control levers are touched by
mistake, the work equipment may move suddenly
causing a serious accident. Before leaving the opera-
tor's seat, always secure work equipment lock lever (7)
in LOCK position.
1.
Depress brake pedal (1) to apply the brake.
NOTICE
If the brake pedal is depressed when the engine speed
or travel speed is high, the brake disc may make a
slipping sound. When depressing the brake pedal,
usually depress decelerator pedal (2) to reduce the en-
gine speed and machine travel speed.
2.
Set joystick (steering, directional and gear shift lever) (3) to
N (Neutral) position.
3.
Set parking brake lever (4) to LOCK position (L).
OPERATION MACHINE OPERATIONS AND CONTROLS
3-237
To Next Page
Loading...
Need help?
General
