METHOD FOR CHECKING FOR LOOSENESS OF ENGINE HIGH-PRESSURE PIP-
ING CLAMP, HARDENING OF RUBBER
NOTICE
If the engine operation is continued while any bolt is loosened or any rubber is hardened or removed,
the contact portions of the high-pressure piping may be worn and may be broken by vibration. Always
check that the proper high-pressure piping clamps are correctly installed.
Check clamp (1) visually and with your fingers that there are no
loose bolts or hardening of the rubber.
If there is any loose bolt or hardened rubber, ask your Komatsu
distributor for replacement.
MAINTENANCE MAINTENANCE PROCEDURE
4-95
To Next Page
Loading...
Need help?
General
