FOREWORD FOREWORD
1-2
FOREWORD 1
This manual provides rules and guidelines which will help you use this machine safely and effectively. The pre-
cautions in this manual must be followed at all times when performing operation and maintenance. Most accidents
are caused by the failure to follow fundamental safety rules for the operation and maintenance of machines. Acci-
dents can be prevented by knowing beforehand conditions that may cause a hazard when performing operation
and maintenance.
WARNING
Before beginning operation or maintenance, operators and maintenance personnel must always observe
the following points.
Read this manual thoroughly and understand its contents fully.
Read the safety messages and safety labels given in this manual carefully so that they should be under-
stood fully.
Keep this manual at the storage location for the Operation and Maintenance Manual given below so that
all personnel involved in working on the machine can consult it periodically.
In case this manual should be lost or damaged, immediately contact Komatsu or your Komatsu distributor
to obtain a new copy.
When you sell the machine, make sure that this manual should be provided to the new owner together
with the machine.
In this manual, measurements are expressed in international standard units (SI). For the reference pur-
pose, weight units used in the past are also displayed in { }.
Storage location for the Operation and Maintenance Manual:
If machine is equipped with a cab.
Inside of right and left doors
If machine is not equipped with cab.
Rear face of floor
To Next Page
Loading...
Need help?
General
