OPERATION EXPLANATION OF COMPONENTS
3-45
FUSE 3
NOTICE
Before replacing a fuse, be sure to turn starting switch to the OFF position.
The fuses protect the electrical equipment and wiring from burning out.
If the fuse becomes corroded, or white powder can be seen, or the fuse is loose in the fuse holder, replace the
fuse.
Replace the fuse with another of the same capacity.
q Chassis
Fuse boxes (A) and (B) are installed under the battery cover.
q Cab (machines equipped with cab)
Fuse box (C) is installed in the overhead panel.
To Next Page
Loading...
Need help?
General
