Komatsu HM400-1 User Manual

.
OPERATION
OPERATION
MOVING MACHINE OFF (FORWARD, REVERSE), STOPPING
MOVING MACHINE FORWARD
WARNING
When moving the machine off, check that the area around the machine
is safe, then sound the horn before starting.
Do not allow people to get near the machine.
Clear the machine's travel path of any obstacle.
Pay a particular attention to the blind spot at the rear of the machine,
when traveling the machine in reverse.
1. Check that there is no warning display on the machine monitor.
2.
Fasten the seatbelt.
3.
Check that dump lever (1) is at the FLOAT position and that the
dump body pilot lamp is out.
If the dump body pilot lamp is lighted up, operate the dump
lever to the HOLD position, then operate it to the FLOAT
position to cancel the dump body HOLD condition.
4.
Depressed the brake pedal fully. Then set parking brake
switch (2) to the TRAVEL position to release the parking brake.
REMARK
If the engine is stopped with the parking brake switch at TRAVEL,
the parking brake will be applied even though the switch is at
TRAVEL. In this case, operate the switch to PARKING, and then
move it back to TRAVEL to cancel the parking brake.
3 - 86

Komatsu HM400-1 Specifications

General

Brand	Komatsu
Model	HM400-1
Category	Trucks
Language	English