.
MAINTENANCE
SERVICE PROCEDURE
CHECKING FOR LOOSENESS OF HIGH-PRESSURE CLAMP, HARDENING OF RUBBER
Check clamps (1) to (15) for loose bolts and hardening of the rubber parts. If there are any loose bolts or hardened
rubber, please contact your Komatsu distributor for replacement.
CHECKING FOR MISSING FUEL SPRAY PREVENTION CAP, HARDENING OF RUBBER
Check for any missing fuel spray prevention caps (1) to (11) or fuel spray prevention cover (12), and check also for
any hardened rubber portions. If there are any missing caps or cover or the rubber is hardened, please contact your
Komatsu distributor for repairs.
4 - 72
To Next Page
Loading...
Need help?
General
