.
MAINTENANCE
SERVICE PROCEDURE
CLEAN HYDRAULIC TANK STRAINER
WARNING
The parts and oil are at high temperature immediately after the engine is stopped, and may cause serious burns. Wait for the
temperature to go down before starting the operation.
If there is still pressure remaining inside the case, the oil or plug may fly out.
Loosen the plug slowly to release the pressure.
1. Remove plug (1) of the strainer (2 places) inside the front left
wheel.
2.
Take the strainer out from strainer case (2), then wash it in
clean diesel fuel.
3.
Assemble the strainer to strainer case (2), then install plug (1).
4 - 66
To Next Page
Loading...
Need help?
General
