.
OPERATION
OPERATION
OPERATION
OPERATION
3. When in the operator's compartment, pull retarder control lever
(5) fully to apply the retarder.
NOTICE
The retarder must not be used as a parking brake.
Do not use the retarder for long-term parking, regardless of the engine
speed.
CHECKS AFTER COMPLETION OF WORK
Use the machine monitor to check the engine water temperature, engine oil pressure, and fuel level. If the engine
has overheated, do not stop the engine suddenly. Run it at a mid-range speed to cool it gradually before stopping.
LOCKING
Always lock the following places.
(1) Fuel filler cap of fuel tank
(2) Cab door (left, right)
(3) Engine hood
(4) Tool box
(5) Battery box
REMARK
The starting switch key is used for locking places (1), (2), (3), (4)
and (5).
3 - 108
To Next Page
Loading...
Need help?
General
