User's Guide
- 111 -
Flash Drive (For bizhub 4700P only)
Flash Drive menu
Use To
1–999
Specify a default number of copies for each print job.
Note: 1 is the factory default setting.
Tray [x]
MP Feeder
Manual Paper
Manual Envelope
Set a default paper source for all print jobs.
Note: Tray 1 (standard tray) is the factory default setting.
Off (1,1,1,2,2,2)
On (1,2,1,2,1,2)
Stack the pages of a print job in sequence when printing multiple copies.
Note: On is the factory default setting.
Sides (Duplex)
1 sided
2 sided
Specify whether prints are on one side or on both sides of the paper.
Note: 1 sided is the factory default setting.
Long Edge
Short Edge
Define binding for duplexed pages in relation to paper orientation.
Notes:
• Long Edge is the factory default setting. Long Edge assumes binding along
the long edge of the page (left edge for portrait and top edge for
landscape).
• Short Edge assumes binding along the short edge of the page (top edge for
portrait and left edge for landscape).
Off
2-Up
3-Up
4-Up
6-Up
9-Up
12-Up
16-Up
Specify that multiple-page images be printed on one side of a paper.
Notes:
• Off is the factory default setting.
• The number selected is the number of page images that will print per side.
To Next Page
Loading...
Need help?
General
