Konica Minolta bizhub 4000P User Manual

User's Guide
- 200 -
Action
Yes
No
Step 3
Check if you are using a
recommended type of paper.
1. Load the indicated tray or feeder
with a recommended type of
paper.
2. Resend the print job.
Do vertical voids appear on prints?
Go to step 4.
The problem is solved.
Step 4
1. Redistribute the toner in the
imaging unit.
a. Remove the toner cartridge,
and then the imaging unit.
b. Firmly shake the imaging
unit.
Warning—Potential
Damage: Do not expose
the imaging unit to direct
light for more than 10
minutes. Extended
exposure to light may cause
print quality problems.
c. Reinstall the imaging unit,
and then the cartridge.
2. Resend the print job.
Do vertical voids appear on prints?
Contact technical support.
Note: The laser scanning unit may
be defective.
The problem is solved.
Toner specks appear on prints
Action
Yes
No
Replace the imaging unit, and then resend the print job.
Do toner specks appear on prints?
Contact technical support.
The problem is solved.

Konica Minolta bizhub 4000P Specifications

General

Print Technology	Laser
Print Speed	Up to 42 ppm
Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 100, 000 pages
Standard Output Capacity	150 sheets
Memory	256 MB
Supported Operating Systems	Windows, Mac OS, Linux
Duplex Printing	Automatic
Connectivity	USB 2.0, Ethernet
PDL	PCL 6, PostScript 3, XPS
Processor Speed	1.2 GHz