Konica Minolta bizhub 4000P User Manual

User's Guide
- 174 -
Action
Yes
No
Step 5
Install additional printer memory, and then resend the print job.
Did the job print?
The problem is
solved.
Contact technical
support.
Job prints from the wrong tray or on the wrong paper
Action
Yes
No
Step 1
1. Check if you are printing on paper that is supported by the tray.
2. Resend the print job.
Did the job print from the correct tray or on the correct paper?
The problem is
solved.
Go to step 2.
Step 2
1. From the Paper menu on the printer control panel, set the paper size
and type to match the paper loaded in the tray.
2. Resend the print job.
Did the job print from the correct tray or on the correct paper?
The problem is
solved.
Go to step 3.
Step 3
1. Depending on your operating system, open Printing Preferences or the
Print dialog, and then specify the paper type.
2. Resend the print job.
Did the job print from the correct tray or on the correct paper?
The problem is
solved.
Go to step 4.

Konica Minolta bizhub 4000P Specifications

General

Print Technology	Laser
Print Speed	Up to 42 ppm
Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 100, 000 pages
Standard Output Capacity	150 sheets
Memory	256 MB
Supported Operating Systems	Windows, Mac OS, Linux
Duplex Printing	Automatic
Connectivity	USB 2.0, Ethernet
PDL	PCL 6, PostScript 3, XPS
Processor Speed	1.2 GHz