Konica Minolta bizhub 4000P User Manual

User's Guide
- 163 -
Action
Yes
No
Step 2
Turn off the printer, then wait for about 10 seconds, and
then turn the printer back on.
Do
Please wait
and
Ready
appear on the printer
display?
The problem is
solved.
Turn off the printer, and then contact
technical support.
Option problems
Cannot detect internal option
Action
Yes
No
Step 1
Turn off the printer, then wait for about 10 seconds, and then turn
on the printer.
Does the internal option operate correctly?
The problem is
solved.
Go to step 2.
Step 2
Check if the internal option is properly installed in the controller
board.
1. Turn off the printer using the power switch, and then unplug
the power cord from the electrical outlet.
2. Make sure the internal option is installed in the appropriate
connector in the controller board.
3. Connect the power cord to the printer, then to a properly
grounded electrical outlet, and then turn on the printer.
Is the internal option properly installed in the controller board?
Go to step 3. Connect the internal option to
the controller board.
Step 3
Print a menu settings page, and then check to see if the internal
option is listed in the Installed Features list.
Is the internal option listed in the menu settings page?
Go to step 4.
Reinstall the internal option.

Konica Minolta bizhub 4000P Specifications

General

Print Technology	Laser
Print Speed	Up to 42 ppm
Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 100, 000 pages
Standard Output Capacity	150 sheets
Memory	256 MB
Supported Operating Systems	Windows, Mac OS, Linux
Duplex Printing	Automatic
Connectivity	USB 2.0, Ethernet
PDL	PCL 6, PostScript 3, XPS
Processor Speed	1.2 GHz