Settings
45
Pos: 101 /Übersc hriften/Überschrif ten 1/A-E/Ein stellungen @ 0\mod_119986 8783862_78.d oc @ 36141
9 Settings
Pos: 102 /BA/ Sicherheit/Gefahre nhinweise/La dewagen/Gefa hr Wartung allge mein @ 0\mo d_119988406 9862_78.doc @ 36704
Danger! - When performing repair, maintenance or cleaning work on the machine, or in
the case of technical intervention, drive elements may start moving.
Effect: Danger to life, injuries or damage to the machine.
• Switch off the tractor engine and remove the ignition key
• Secure the machine and tractor against the possibility of rolling back.
• Switch off the PTO and disengage it
• After the repair, maintenance and cleaning work or technical interventions are completed,
mount all protective coverings and safety devices properly again.
• Avoid skin contact with oils, greases, cleaning agents and solvents.
• In the event of injuries or burns due to oils, cleaning agents or solvents, contact a
physician immediately.
• All other safety instructions must also be followed to avoid injuries and accidents.
Pos: 103.1 /Üb erschriften/Üb erschriften 2/K-O/ Kreiselfahrw erk einstellen @ 2\mod_1202 882031680_78.d oc @ 6210 5
9.1 To adjust the rotor running gear
Pos: 103.2 /BA/Ei nstellungen/Sc hwader/Kreiself ahrwerk/Kreis elfahrwer ks Querneigung SW 710 T @ 2\ mod_1202743 103095_78.doc @ 60929
SW46T016
4
3
Fig. 22:
To ensure that the tines are always adjusted optimally to the ground, the rotor can also be
inclined transversely to the chassis.
• Switch off the engine, remove the ignition key, and secure the tractor and machine from
rolling away.
• Using the setting screw (3), adjust the desired angle of inclination on the running gear.
• Insert the setting screw back into the lock (4).
Pos: 103.3 /BA/Ei nstellungen/Sc hwader/Kreiself ahrwerk/Hin weis schweres F utter - Fahr werk rechts mögli chst niedrig ein stellen @ 7\ mod_121558088 2876_78.doc @ 103821
Note
If the forage is heavy, adjust the right running gear as low as possible!
Pos: 104 /BA/--- --Seitenumbruc h------ @ 0\mo d_119617531 1226_0.doc @ 4 165