Maintenance
50
Pos: 110.17.1 /Ü berschriften/Ü berschriften 2/P-T/R eifen @ 0 \mod_119735 7995667_78.doc @ 18075
10.6 Tyres
Pos: 110.17.2 / BA/Sicherheit/G efahrenhin weise/Falsche Rei fenmontage @ 0\mod_119735 8162433_78.d oc @ 18132
Warning! - Tyre fitting incorrect
Effect: Injuries or damage to the machine
• Fitting tyres requires sufficient knowledge and the availability of proper tools!
• If tyres are not correctly fitted, it could explode when pumped up. This can cause serious
injury. If you do not have sufficient experience of fitting tyres, have tyres fitted by the
KRONE dealer or a qualified tyre specialist.
• When fitting tyres on the wheel rims, the maximum pressure given by the tyre
manufacturer must not be exceeded. The tyre or even the wheel rim could explode
and/or burst.
• If the tyre heels do not fit properly when the maximum permitted pressure is reached, let
out the air, align tyres, lubricate the tyre heels and pump up the tyre again.
• Detailed information about how to fit tyres onto agricultural machinery can be obtained
from the tyre manufacturers.
Pos: 110.17.3 / BA/Wartung/Reif en/Reifen-Luftdru ck allge mein @ 0\mod_11 99956852616 _78.doc @ 37 365
10.6.1 Tyre air pressure
Check the tyre pressure at regular intervals and refill if necessary. The tyre pressure depends
on the size of the tyres. The values are listed in the table.
Pos: 110.17.4 / BA/Wartung/Reif en/Schwader/R eifen-Luftdruc k Tabelle Schw ader 46T @ 7\mod_12157 63026485_78.do c @ 105587
Type Tyre identification Tyre pressure [bar]
Tandem axle 18 x 8.50-8 6 PR 1,0
Pos: 110.17.5 / BA/Wartung/Mutt ern und Schr auben (50h) a nziehen @ 0\m od_1196949864 530_78.doc @ 15293
Note
Regularly check that nuts and bolts are tightly in place (approx. every 50 hours) and tighten
them if necessary.
Pos: 110.18 /BA /-----Seitenu mbruch------ @ 0\ mod_11961753 11226_0.doc @ 4165
To Next Page
Loading...
Need help?
General
