KTM 125 Duke 2017 User Manual

7 COMBINATION INSTRUMENT 43
7.8 Shift warning light
402809-01
The shift warning light is integrated in the tachometer display.
In the Shift Light menu, the engine speed for the shift warning light can be set. The shift
warning light is always active during the running-in phase (up to 1,000 km / 621 mi). The
shift warning light can only be deactivated, and the values for RPM1 and RPM2 can only be
adjusted after this. The shift warning light lights up red at RPM1and flashes red at RPM2.
Info
In sixth-gear, the shift warning light is deactivated when the engine is warm after
the first service.
Coolant temperature ≤ 35 °C (≤ 95 °F)
ODO < 1,000 km (< 620 mi)
The shift warning light always
lights up at
6,500 rpm
Coolant temperature > 35 °C (> 95 °F)
ODO > 1,000 km (> 620 mi)
RPM1 shift warning light lights up
RPM2 shift warning light flashes

KTM 125 Duke 2017 Specifications

General

Displacement	124.7 cc
Bore x Stroke	58 mm x 47.2 mm
Compression Ratio	12.6:1
Power	15 hp (11 kW) @ 10, 000 rpm
Transmission	6-speed
Fuel System	Electronic Fuel Injection
Rear Suspension	WP monoshock
Seat Height	830 mm
Ground Clearance	185 mm
Dry Weight	137 kg
Engine Type	Single cylinder, 4-stroke
Torque	12 Nm @ 8, 000 rpm
Frame	Steel trellis frame, powder coated
Front Suspension	WP upside-down Ø 43 mm
Front Brake	Four-piston radial fixed caliper, brake disc
Rear Brake	Single-piston floating calliper, brake disc
Front Tire	110/70 x 17
Rear Tire	150/60 x 17
ABS	Bosch 9MB Two Channel ABS