12 SERVICE WORK ON THE CHASSIS 93
12.7 Mounting the passenger seat
H01992-01
–
Attach hooks
1
on the passenger seat to seat mounting
2
on the subframe, and
lower it at the rear while pushing forward.
– Press down the passenger seat until it clicks into place.
Warning
Danger of accidents The passenger seat can come loose from the anchoring if it
is not mounted correctly.
– After mounting the passenger seat, check that it is locked correctly by
pulling up.
– Finally, check that the passenger seat is correctly mounted.
12.8 Removing the front rider's seat
Preparatory work
– Remove the passenger seat. (
p. 92)
H01993-01
Main work
– Raise the rear of the front rider's seat, pull it towards the rear, and remove it upwards.
To Next Page
Loading...
Need help?
General
