KTM 125 Duke 2017 User Manual

12 SERVICE WORK ON THE CHASSIS 91
F00735-10
–
Mount protection cap
1
.
Finishing work
– Remove the rear of the motorcycle from the lifting gear. (
p. 88)
12.5 Cleaning the dust boots of the fork legs
Preparatory work
– Raise the motorcycle with the rear lifting gear. (
p. 88)
– Lift the motorcycle with the front lifting gear. (
p. 89)
E00735-10
Main work
–
Push dust boots
1
of both fork legs downward.
Info
The dust boots should remove dust and coarse dirt particles from the fork
tubes. Over time, dirt can accumulate behind the dust boots. If this dirt is not
removed, the oil seals behind can start to leak.

KTM 125 Duke 2017 Specifications

General

Displacement	124.7 cc
Bore x Stroke	58 mm x 47.2 mm
Compression Ratio	12.6:1
Power	15 hp (11 kW) @ 10, 000 rpm
Transmission	6-speed
Fuel System	Electronic Fuel Injection
Rear Suspension	WP monoshock
Seat Height	830 mm
Ground Clearance	185 mm
Dry Weight	137 kg
Engine Type	Single cylinder, 4-stroke
Torque	12 Nm @ 8, 000 rpm
Frame	Steel trellis frame, powder coated
Front Suspension	WP upside-down Ø 43 mm
Front Brake	Four-piston radial fixed caliper, brake disc
Rear Brake	Single-piston floating calliper, brake disc
Front Tire	110/70 x 17
Rear Tire	150/60 x 17
ABS	Bosch 9MB Two Channel ABS