COMBINATION INSTRUMENT 7
109
Press and
hold the SET
button for 3 -
5 seconds.
Activation of the motorcycle traction control.
7.27.29 MTC+MSR (optional)
F01305-01
Condition
• The motorcycle is stationary.
• Cruise control system function deactivated
– Press SET button when the menu is closed.
– Press UP or DOWN button until Motorcycle is marked. Press
the SET button to open the menu.
– Press the UP or DOWN button until MTC+MSR is marked. Press
the SET button to open the menu.
– Activate menu item using the UP or DOWN button.
– Switch MTC+MSR on or off by pressing the SET button.
Info
Do not open the throttle when switching on or off.
When the ABS is switched off or the Offroad ride mode
is active, the MSR is not active.
After the ignition is switched on, the motorcycle
traction control and engine traction torque control are
enabled again.
To Next Page
Loading...
Need help?
General
