WHEELS, TIRES 15
237
15.4 Installing the rear wheel
Warning
Danger of accidents Oil or grease on the brake discs reduces the braking effect.
– Always keep the brake discs free of oil and grease.
– Clean the brake discs with brake cleaner when necessary.
Warning
Danger of accidents There is no braking effect to start with at the rear brake after installing the rear
wheel.
– Actuate the foot brake several times before going on a ride until you can feel a firm pressure point.
– Check the rear hub damping rubber pieces. ( p. 240)
S01639-10
– Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
– Change the rear wheel bearing.
–
Clean and grease shaft seal ring
1
and contact surface
A
of
the spacer.
Long-life grease ( p. 326)
– Insert a spacer.
– Clean and grease the thread of the wheel spindle and nut.
Long-life grease ( p. 326)
To Next Page
Loading...
Need help?
General
