BRAKE SYSTEM 14
217
Due to the additional electronic control of the brake force distri-
bution between the two wheels, the braking force is optimally dis-
tributed and the motorcycle is additionally stabilized.
Info
The MSC is only active in Road ABS mode.
14.2 Checking the brake discs
Warning
Danger of accidents Worn-out brake discs reduce the braking effect.
– Make sure that worn-out brake discs are replaced immediately. (Your authorized KTM workshop will
be glad to help.)
400618-10
– Check the front and rear brake disc thickness at multiple
points for the dimension
A
.
Info
Wear will reduce the thickness of the brake disc at con-
tact surface
1
of the brake linings.
Brake discs - wear limit
front 4 mm (0.16 in)
rear 4.5 mm (0.177 in)
To Next Page
Loading...
Need help?
General
