12 SUSPENSION SETTING
176
12.1 Fork/shock absorber
Semi-active suspension WP Semi‑active Suspension can be used to tune the suspension individually without the
use of tools.
Electronic suspension setting WP Semi‑active Suspension constantly regulates the damping behavior of the sus-
pension taking into account various sensor data.
As a result, the electronic damping valves are matched to the current driving situation and terrain characteristics
as well as the settings made by the rider in the Load and Damping menus.
Always adapt the suspension to your riding style and the payload.
In the Load menu, the suspension can be set to the loading condition.
In the Damping menu, the damping behavior of the suspension can be set.
12.2 Load
F01300-01
The settings for different payloads can be selected in
the Load menu. A selection can be made between one-person
operation, one-person operation with luggage, two-person
operation, and two-person operation with luggage.
The payload selected most recently is shown in the display.
Info
For the setting to be accepted by the motorcycle, the
motorcycle must be stationary and unloaded, and the
engine must be running.
The symbol of the last payload flashes until the new setting
is adopted.
To Next Page
Loading...
Need help?
General
